No products in the cart.
Proper upkeep and care of your cold room doors in the harsh climate of the UAE is important. Any compromises can lead to inefficient operation or even breakdown. With the extreme temperatures and humidity common in the region, even minor issues with cold room doors can escalate the energy cost rapidly. Whether you manage a restaurant, run a supermarket, or host an enormous storage facility, you must take the right measures to keep doors well-maintained and provided by the best cold room door supplier in UAE.
- Regular Inspection and Cleaning
Prioritize regularly cleaning and inspecting your cold room doors. Dirt or other debris that lingers on the door surfaces, gaskets, and seals can make your doors a less effective barrier against keeping cold air where it belongs. You can clean door panels, handles, and gaskets using mild detergent and a soft cloth.
Check the doors once a week for signs of damage. Look for cracks, brittleness, or gaps in the gaskets and replace them promptly.
- Examine and Adjust the Door Alignment
Uneven doors can lead to air gaps, which allow warm air from the outside to make its way inside. This can simply lead to higher energy bills and unnecessary stress from hindered operations, as your material inside the cold room is impacted by hot air.
Check the alignment by seeing if you can close your door correctly. If the door closes with difficulty or there are gaps, it may be a sign that it must be aligned correctly. Usually, adjusting the hinges or door frame will do this. If the misalignment is major, then calling in a professional technician would be good, as they will ensure that the door is perfectly aligned and sealed.
- Grease and Lubricate the Door Hinges and Hardware
UAE has a dry, sandy environment, which may mean that cold room door hinges and hardware are more susceptible to wear. Over time, this will cause the door to creak when pushed open or shut, and at worst, over a few years, it can even damage the door frame. To avoid this, you should regularly lubricate the door hinges, handles, and other parts using an appropriate performance lube.
Choose a moisture-resistant lubricant that works well in the high temperatures experienced in the UAE.
- Educate Your Staff
To minimize any mishaps or damage to your cold room doors, we recommend training your staff to understand their importance and correct usage. Help them understand that continuously opening and closing doors affects energy consumption.
Ask employees to notify you immediately of any problems so they can be resolved before they become severe. This creates a culture of preventative maintenance, which means you will not frequently have to look for a cold room door supplier in the UAE.
- Monitor the Door Seals and Insulation
Door seals and insulation are the front line of defense against warm air penetrating a cold room. However, these components are difficult to maintain in temperatures like the UAE, as the inside and outside temperatures vary greatly. Therefore, it is recommended that you check the seals for cracks, gaps, or damage regularly and replace them as needed.
Also, make sure to check the insulation around the door frame and in the door panels. If the insulation in your door gets damaged or degraded over time, it will weaken its ability to seal all that cold air inside. The condensation forming on the exterior is a sign that the insulation needs to be replaced.
To Wrap Up
Cold room doors in the UAE are only effective with regular maintenance and care. Knowing the tips mentioned above will help you understand what needs to be done for your cold room doors to not only be kept in good condition but also to become more reliable. This saves time and, most especially, money by utilizing lower energy consumption.
Proper and regular maintenance with the help of professional inspections can help you overcome any obstacles created by the harsh UAE climate. If you are looking for a reliable cold room door supplier in UAE, contact Barad Atlanta Trading LLC. We have a wide range of cold room doors to suit every business need and expertise to cater to any of your doubts.
